
Section 6: OmniSport 2000 Pro Swimming
Software
The OmniSport 2000 Pro Swimming software interfaces with the OmniSport 2000 timer and allows
timing officials to control the competition through an easy-to-use, reliable and convenient Windows
®
based user interface installed on a Windows compatible computer system.
This section describes how to install, configure and use this software system, Version 1.1.18.
The OmniSport 2000 Pro Swimming software was designed to operate on a Windows
compatible personal computer. In most circumstances, the computer used by the software
will be purchased through Daktronics. This ensures the software requirements will be met.
If a computer is not purchased through Daktronics, the following list describes the
requirements for the OmniSport 2000 Pro software.
OmniSport 2000 timing console
Internet Explorer® 5.0 or higher
400 MHz or higher CPU
Windows 98 operating system or higher
Minimum 64 MB of RAM
Standard keyboard and mouse
One open serial port for connection to the OmniSport 2000 timer (COM port) or USB
port and adapter
The OmniSport 2000 Pro software is a computer interface to the OmniSport 2000 timer. There
must be a serial connection for the timing operations to be controlled by the Pro software.
The OmniSport 2000 timer must also be connected properly to all competition equipment and
accessories if using a display or judge‘s consoles. Refer to Section 2 for more information
pertaining to the hardware installation of the OmniSport 2000 timer.
To install the Pro Swim software from the Internet:
1. Open an Internet browser to:
http://dakfiles.daktronics.com/downloads/Sports_Products/OmniSport%202000/
Pro/Swimming
2. Click the ―OmniPROSwimmingInstall.exe‖ file, and then click Run to begin the
installation procedure.
Note: Click Run again if a security warning appears.
3. Follow the onscreen instructions to complete the installation.
Comentários a estes Manuais