
The battery level will show as CHARGED or LOW. Press [Enter] to exit the menu.
Scoreboard
These menus test the scoreboard drivers.
Cycle ON/OFF
This menu checks the signal to the scoreboard.
Press [1] to toggle the scoreboard ON and OFF. When this menu is selected, an all ON signal
is sent at intervals of approximately 3 seconds. This will continue to cycle ON and OFF until
pressing [Enter] to continue.
Driver Address
This menu shows which drivers control the digits.
Press [3] to display the driver addresses. The number or letter will show which output on the
driver that digit is plugged into. This will remain on the display until [Enter] is pressed.
Digit Number
This menu confirms the digits are operational and
properly plugged at the time of installation and if the
system needs debugging. Call Daktronics for service.
Press [Enter] to exit.
SB TEST MENU
1-CYCLE ON/OFF
DISPLAY ALL ON
ENTER TO EXIT
SHOWING ADDRESS
ENTER TO EXIT
From Main Menu – [5]>[2]>[1]
From Main Menu – [5]>[2]>[3]
SHOWING DIGIT #
ENTER TO EXIT
From Main Menu – [5]>[2]>[2]
SB TEST MENU
3-DIGIT NUMBER
Comentários a estes Manuais