Daktronics PC-2001 Manual do Operador descarregar pdf (Página 36)

General Console Features and Operations

Broadcast Group Setting 1

The asterisk will move to the channel setting. Use the number keys to edit this value and

press [Enter] to accept. The default setting is

Broadcast 1 Channel 1 as shown in the LCD illustration.

For all single controller system use this setting.

Channel Setting 1-8

Channels that may be used with broadcast channel 1. The channel switch on the receiver

must match this value and only the Broadcast 1 (BCAST1) jumper must be installed.

Multiple Controller with Single Broadcast Group Channel Setting

Typically all multiple controller systems use broadcast 1 and channel 1 for the first controller

and channels 2-8 for all remaining controllers. All radio receivers must be set with a channel

switch setting corresponding to the console controlling the scoreboard and a Broadcast 1

(BCAST1) jumper set.

Adjust channel settings and broadcast groups using the same procedures previously

described for basic operation of radio settings.

Multiple Controller with Multiple Broadcast Systems Channel Setting

Typically all multiple controller systems use Broadcast Group 1 Channel 1 for the first

controller in Broadcast Group 1; and Broadcast Group 2 Channel 1 for the first controller

in Broadcast Group 2. All other consoles in each group are added sequentially, using

channels 2-8.

Adjust channel settings and broadcast groups using the same procedures previously

described for basic operation of radio settings.

Equipment needed:

 Computer connected to the Internet

 Computer with a serial com port. The com port can be built-in or a

USB-to-serial adapter

 9-pin male-to-female cable, Daktronics part # W-1267 or Radio Shack part #27-117

(the cable is included in the maintenance kit)

 OmniSport 2000 timing console

To update the OmniSport 2000 timer, complete the following instructions:

1. Connect the 9-pin serial cable from the com port of the computer to the Expansion

Port (J4) on the console.

2. Open an Internet browser and go to:

http://dakfiles.daktronics.com/downloads/Sports_Products/OmniSport%202000

Timer/DakLoader2.exe

BCAST GROUP 1

RADIO CHAN 01

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 299 300

Sem comentários

Daktronics PC-2001 Manual do Operador Página 36