Daktronics PC-2001 Manual do Operador descarregar pdf (Página 42)

Operating the Console in Swimming Mode

Examples when to use Split Arm:

 During a relay, the arming delay for the touchpad was too short because a swimmer

from one of the first three legs was still in the water and triggered the touchpad

before climbing out.

 Another swimmer reached over the top of a touchpad and triggered the pad.

 A malfunctioning touchpad.

 If the arming delay was set too long and all lanes need to be armed for a split, press

[Split Arm All].

 If there were a start system failure, press [Start] then [Split Arm All] and [Enter].

The timer records the finish order of the race. The time will be incorrect, but the

finish order will be correct.

The swimming insert (Figure 48) has additional keys on the fourth row along with keys on

the right side of the insert which are used regularly during a meet. The remaining keys are

not lane specific, but are equally important in operating the timer.

Start

In most cases, there is a horn start connected to the timing console to signal the start of the

race. Under unique circumstances, the operator has the option to start the timer counting by

pressing [Start]. The printer will label the results with the source of the start. If the keypad

was used it would be labeled—Source: Keyboard. If the start was from the horn start it would

be labeled—Source: External.

Examples when to use Start:

 Test the timing system or scoreboard

 If there were a start system failure, press [Start] then [Split Arm All] and [Enter].

The timer records at least the finish order of the race. The time will be incorrect, but

some data is better than no data.

Store Print

Press [Store Print] to tell the timer to store the race results for that heat up to that moment. In

addition to storing the results, the timer will print whatever printouts are configured in the

settings menu for the printer (refer to Section 5.4). If using the OmniSport 2000 Pro

Swimming software, the operator may view/edit the settings from that program (refer to

Section 6.6). If [Store Print] was pressed before the race was complete, it is essential that it be

pressed again when the race is complete in order to save and print the complete results. If

not, any changes/additions will be lost.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 299 300

Sem comentários

Daktronics PC-2001 Manual do Operador Página 42