Daktronics PC-2001 Manual do Operador descarregar pdf (Página 161)

Delete Penalty▪

Press [Delete Penalty▪] and the LCD for that team will show a (→) next to the penalty time. If

there is more than one penalty time counting for that team, use [↑] and [↓] to select which

penalty needs to be deleted. Press [Enter] to delete the penalty or press [Clear] to exit

without deleting the penalty.

Clear All Penalties▪

Press [Clear All Penalties▪]>[Enter] to remove all penalties that are currently being counted

for that team.

Settings to Note

The Horn Control setting can be set so that the main clock horn and the shot time horn are

either tied together so that when one sounds, they both sound, or they can be independent.

The Shot=0 Control setting is set to On and the shot clock counts down to 0 second, the game

clock stops. If the Shot=0 Control setting is set to Off, the game time will not stop when the

shot time reaches 0 seconds. Refer to Section 11.10 to review or change this setting.

Complete the following steps before each game. Review Section 3: General Console Features

and Operations thoroughly before beginning operations.

1. Set up and test the system. Turn on the timer. Enter the correct date and time. Then

select the proper sport operation.

2. Printout the consoles settings [Menu]>[2]>[2]>[Enter] and verify they are correct.

Specifically review:

 Horn Control (Section 11.13 )

 Shot=0Control ( Section 11.10)

 Default Time Set (Section 11.3)

 Auto Sequence (Section 11.9) is on or off. If the Auto Sequence is set to ON, the

console will:

a. Count Period 1 time down to zero.

b. Switch to Rest 1 time and start counting. Count down to zero.

c. Switch to Period 2 and reset time to period time. Wait for start.

d. Operator presses [Start].

e. Count Period 2 time down to zero.

f. Switch to Rest 2 time and start counting down to zero.

g. Switch to Period 3 and reset time to period time. Wait for start.

h. Operator presses [Start].

i. Count Period 3 time down to zero.

j. Switch to Rest 1 time and start counting down to zero.

k. Switch to Period 4 and reset to period time. Wait for start.

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 299 300

Sem comentários

Daktronics PC-2001 Manual do Operador Página 161