
Operating the Console in Swimming Mode
1 2 3 4 5 6 7 8 9 10
The top line of the two left LCD screen display the current lane status. An arrow by the lane
also indicates which lane is currently selected for editing. The following table defines what
each symbol means.
There is an error in the lane and the data needs to be edited.
Indicates the person in the lane has been disqualified.
Indicates an edited time.
Lane has been turned off.
The bottom line of the left LCD screen shows the lane and time, and the center LCD shows
the backup time. The right LCD shows the options available for editing the lane times. Press
[1] to skip to the next lane. Press [2] to use the backup time. Press [3] to edit the lanes time.
Press [4] to turn the lane ON/OFF.
Disqualification (DQ)
Before the meet, the timing operator should clarify with the meet referee if he/she wants the
swimmers to be disqualified on the timer. Clarification of this is important for results to be
properly ranked on the printouts and meet management software which will show as a DQ
on the scoreboard.
Press [DQ] (disqualification) and [Lane ON/OFF] for the desired lane (or press the lane
number on the numeric keypad) and press [Enter]. The DQ operation is normally done at the
conclusion of the race, after the officials have ruled on the situation that caused the swimmer
to be disqualified. On exit from the DQ command, the scoreboard
is automatically updated and any subsequent printouts will show
the revised placing. The DQ operation shown on the right LCD
screen as illustrated, can be done at any point in the race and
does not affect arming or recording of times for the lane. Press the same lane number
again while in the DQ command to re-qualify the swimmer and the original status
indicator is returned.
OK OK 00 - - E
LN 6 0.00*
▪ ← OK OK E OK
BACKUP -- 00:00.00
1 – SKIP 2 – BACKUP
3 – EDIT 4 – ON/OFF
DISQUALIFY (DQ)
LANE NUMBER:10
Comentários a estes Manuais