Daktronics PC-2001 Manual do Operador descarregar pdf (Página 241)

ED13584 PO Box 5128 201 Daktronics Dr. Brookings, SD 57006

Rev 6 22 January 2009 Tel 605-697-4300 or 800-DAKTRONICS Fax 605-697-4700

Page 5 of 8 www.daktronics.com e-mail: helpdesk@daktronics.com

OMNISPORT

2000 TRACK QUICK REFERENCE

1. Confirm that the timer is reset.

Look at the right LCD, line 1 to verify that the running

time is 00:00.0. If it is not, press [RESET]>[ENTER].

Before

Race

2. Set the timer to the correct Event and Heat.

The right LCD, line 2 displays E:(event) H:(heat)

Press [EVENT/HEAT] and type in the correct event and

heat numbers, or use [EVENT +1], [HEAT +1], [HEAT –1].

3. Confirm that the timer is set correctly to time

either a lane or non-lane event.

Look at the right LCD; line 2 to verify which mode of

timing the console is currently in. To change the mode

of timing, press [LANE TIMING] or [NON-LANE TIMING].

During

Race

1. Timer starts.

Typically started automatically from the horn start,

pushbutton or gun transducer. (Optional: [START] for

manual start).

2. Turn off any unused lanes.

Press [LANE ON/OFF (1-10)] to turn the desired lanes off.

Press again to turn them back on.

1. Confirm that all lanes with an athlete have

finished.

Look at the left two LCDs to verify that the final time has

been received.

2. DQ any disqualified athletes.

Press [DQ]>[(1-10)]>[ENTER] for each appropriate lane.

3. Print the results.

Press [STORE/PRINT] and review the printout.

After

Race

4. Edit the race results. (For advanced operators

only.)

Press [EDIT] to get into this function. See the OmniSport

2000 operator’s manual for complete instructions.

5. If any of the results were modified, print the

results again.

Press [STORE/PRINT].

6. Reset the timer and get ready for the next event.

Press [RESET]>[ENTER]. The scoreboard will continue to

display the results of the last race until the start of the

next race.

Lane Status Indicators:

(Blank)

Lane is Off.

Timer is Reset.

1-2

(counting

down)

Arming delay. When there are numbers counting

down, the timer will ignore any button presses.

Lane is armed for finish.

Race is over for this lane.

There is a problem with the button interface.

Special Timer Operations

Action

Always Ready Start

If a start was missed because the timer was

not reset, or if the timer was reset following a

valid start you can still recover the race.

It is

important that this is completed before the

timer receives the first finish times.

After the timer has been reset, press [EDIT]. The timer prompts you for

the time of day that the start was received. The time displayed on the

LCD will be time of day from the last start received. If this is not the

desired start time, you will find all of the start times received printed on

the log printout. Type in the correct start time of day and press [ENTER].

Entering Home, Guest 1, Guest 2, and Guest 3

scores.

Press [MENU]>[2]>[1] and then enter in the team scores using the

numeric keypad, followed by [ENTER]. To return to the main track

screen, press [MENU].

Entering a record time.

Press [MENU]>[2]>[2] and then enter in the record time using the

numeric keypad followed by [ENTER]. To return to the main track screen,

press [MENU].

Printout Time Label Descriptions

B (1-3)

Buttons 1 through 3

B or BK

Backup time

Edited time

Manual time

1 2 ... 236 237 238 239 240 241 242 243 244 245 246 ... 299 300

Daktronics PC-2001 Manual do Operador Página 241

Comentários a estes Manuais

Daktronics PC-2001 Manual do Operador Página 241

Comentários a estes Manuais

Manuais e produtos relacionados com Relógios de parede Daktronics PC-2001