Daktronics PC-2001 Manual do Operador Página 1

OmniSport 2000 Timing Console and Pro Software Operations Manual ED-13312 Rev 11 – 25 June 2010 Customer: __________________________ Contr

viii Dive Order ... 119 Reports ...

Entering Dive Lists (Optional) Each diver must perform certain dives during an event. The Dive List of each diver can be stored in the Dive Orders. To

85 1 2 3 4 5 6 7 8 9 10 To start entering scores, first select a diver, dive, posi

There are two methods of navigating through the menus in the OmniSport 2000 console. Refer to the OmniSport 2000 Quick Reference Guide ED-13584 (Fig

87Dimming Dimming adjusts the dimming level of the scoreboards that are configured to receive Multi-drop protocol. Use the numeric keypad to selec

Team Score This menu is used to manually edit up to four team scores for display on auxiliary team score scoreboards. The * identifies which team sc

89 Entering a [0] inserts a diving event and displays the dive order (A, B, C, or D) set for that event. When to use this:  If the console is

Delete Event This menu is used to delete an event from the event order list. Press [↑][↓] to move the cursor to select the event location number

91Verify on the left LCD that the diver # and round are both set to 01. Use the numeric keypad to enter the four-digit dive number and the letter keys

When choosing this menu, the operator can print a specific event result, the current event order in the OmniSport 2000 console, or the settings for

93Print Event Order This menu is used to print the event order to the console‘s built-in thermal printer. Press [YES] to print the event order (F

ix General Configurations ... 138 Com Settings Configurations ...

Print Individual Dive List This menu is used to print the dive order of the current diver. Press [YES] to print the Dive Order. Press [NO] to exi

95Position Code This is a user preference setting to identify if the Dive Positions are going to be labeled A, B, C, D or S, P, T, F. Use [←][→]

Press [←][→] to choose Multicast, Multidrop or Multiline protocol, depending on which type of display is used and then press [Enter] to save. Whe

97Note: Selecting Omni 6000 tells the timer to transmit Omni 6000 RTD item numbers on the RTD output. This menu offers the following submenus to set

The battery level will show as CHARGED or LOW. Press [Enter] to exit the menu. Scoreboard These menus test the scoreboard drivers. Cycle ON/OFF This

99 This menu tests whether or not the judge consoles are connected to and communicating with the OmniSport 2000 timing console. The right LCD scr

Section 8: Judge Consoles Reference Drawings: System Riser, RC-100, Rodeo/Diving/Sync Swimming ... Drawing A-230608 Judge cons

If there is only one panel of judges, they enter both sets of scores for the event. When there are two panels of judges, each panel enters a separate

The LCD screen will then show the two scores and an OK after they have been entered. Free Routine Operation The first score to enter for the free rout

x Print Settings... 148 11.8 Setup Menu

Section 9: OmniSport 2000 Pro Diving Software The OmniSport 2000 Pro Diving software interfaces with the OmniSport 2000 console to receive scores via

Note: Click Run again if a security warning appears. 3. Follow the onscreen instructions to complete the installation. To install the Pro Diving so

2. Click Register Online. 3. Click OK in the registration confirmation box (Figure 99). Note: Online registration offers up to 3 unlocks and may

Splash Screen Features  Schedule shows Current, Past, and Future Meets for the preceding and following 30 days, depending on the selected date on t

4. Click Add Event to insert a new event to the meet (Figure 105).  Type in a descriptive Title for the event.  Select the number of Rounds, f

Run Reports Click Run Reports from the splash screen to configure reports and printouts. This screen (Figure 108) has numerous options for printouts t

Path & Generate Buttons Click Path to select a different folder in which to save the printouts. After selecting all of the desired printout sett

Note: If the cables are connected properly, the connection indicator in the main application will be green (Figure 110). If there is a problem with th

Other Settings  Under Importing Dive Orders, select whether to Keep Dives or Replace Dives after importing a meet file.  Enabling the Console Pri

xi Delete Step ... 161 Copy Workout ...

3. Click Next when it is time to allow scores to be entered for the next diver(s), and continue to do so until every round of the event is complete.

Editing Scores 1. Select a diver/team from the Event Order list, and then click Edit Scores, or right-click a diver/team, and then select Edit Score

Cutting/Uncutting Divers To skip the turn of a diver/team in the roster, right-click them and select Cut Diver. This removes the diver/team from the c

Meets Create Click to create a new meet. This is the same process as described in (Figure 101) on the splash screen Common Tasks. Open Click to open

7. Click Create, and then click Yes to make a copy of the meet. Click Yes once more to immediately open the meet if desired, otherwise click No to s

In Meet The In Meet tab contains commands for adjusting the dive order, handling scores and leaderboards, and adding/deleting divers during meets (Fig

Cut Click to remove a selected diver/team from the roster. Uncut Click to return a selected diver/team to the roster. Active Click to make a selecte

Options These settings pertain to the appearance of the reports.  Select Border to separate each cell of information with a gray border.  Select

2. On the Replace? window, click Yes to replace the current rosters, or click No to add the imported roster together with the current roster. Note

DD Table Edit Click to view, create, and edit DD tables and dives (Figure 135). Note: The default FINA table cannot be deleted. While still possible

xii Paper Feed ... 175 Event Heat ...

Adding Dives Select a DD table. 1. Click Add Dive to create a new dive. 2. Use the window that appears to fill in all the necessary dive/scoring i

Help The Help menu bar includes commands for registering, viewing user guides, and viewing information about the software (Figure 139). Register Onlin

Share Go to Share > Import Meet or Export Meet to share meet files. Importing and exporting meets are discussed in the Share menu bar section. Prin

6. Click and drag the commands in the right white box to arrange them in any order. 7. Click Place Quick Access Toolbar below the ribbon if desired

Section 10: OmniSport 2000 Pro Synchronized Swimming Software The OmniSport 2000 Pro software interfaces with the OmniSport 2000 timer and allows off

To install the Pro Diving software from a CD: 1. Insert the software CD into the CD-Rom drive. 2. If the auto run program does not start, click o

continue running the software. Upon proof of purchase the operator receives the unlock code which allows unlimited use of the software. To register th

the serial connections are operating properly. Console detection is continual; others only come across when changed. When connected and operating pr

Competitor Information This section of the main application screen (Figure 153) displays the current swimmer's name and affiliation, the competit

xiii Finish Page Time ... 188 Results Order ...

The Percentages section allows the operator to set up which percentages of the Figures, Technical and Free scores drop-down list box used to calculate

Select a swimmer's name and Click Up/Dn to change the order of the swimmers shown on the event order tab. Right-click in the Event Order tab for

To edit a swimmer‘s age group, draw number or name, right click on that swimmer and select the information to edit. The appropriate information may be

Timer Configuration Configuring the OmniSport 2000 Pro Synchronized Swimming software is an important part of managing events efficiently and compl

General Configurations The General field configures the settings common to all stream types (Figure 170).  Enable: Should always be checked.  T

This section deals with the operational procedures used before a meet and during and after each event. Before the Meet Before each meet, three thing

There are two ways scores are entered into the OmniSport 2000 Pro Synchronized Swimming software: manually with the software or through peripheral jud

Section 11: OmniSport 2000 Console for Water Polo Sport Insert LL-2569 Reference Drawings: Insert, LL-2569; Water Polo, OmniSport2000 ...

The Water Polo keypad insert is LL-2569 (included in Appendix B:). Refer to (Figure 175) in the following pages which describe the functions of each

time, then press [Enter]. This sets the main clock to the new period time and it changes the default period time in the console‘s stored memory. Pr

xiv OmniSport 2000/6000 Diving RTD Item Numbers (os6000 dive.itf)... 222 OmniSport 2000/6000 Pace Clock RTD Item Numbers (os6000 pace

Start Press [Start] to start the clock counting. If the main clock is not counting, the shot clock will start counting when the main clock is started.

Delete Penalty▪ Press [Delete Penalty▪] and the LCD for that team will show a (→) next to the penalty time. If there is more than one penalty time cou

l. Operator presses [Start]. m. Count Period 4 time down to zero. n. Switch to Rest 2 time and start counting. Count down to zero. o. Switch to Pe

The Scoreboard Menu is where the operator can turn the scoreboard output ON or OFF, set the dimming level for Multi-drop displays and display Time-

The running time must be reset before the console will display Time-of-Day on the scoreboard. Time-of-Day will remain on the scoreboard until:

Timer The following is a more detailed look at timer configurations. Set Times These menus establish the times used while playing the game from over

Timeout Time This menu sets the Timeout time. Penalty Time This menu sets the time for each penalty. When the Auto Sequence menu is turned O

The Timeouts menu sets the maximum number of timeouts allowed for each team. Press [0]-[9] to set the maximum number of full timeouts allowed fo

Press [Yes] if a module is used and [No] if no nodule will be used. RTD Offset This menu will add 0K, 5K, 10K, or 15K to the RTD data being sen

which protocol is used, unplug the signal to the display from the back of the console. Connect power to the display. When it powers up, it will displa

Section 1: Introduction This manual explains the operation, installation, maintenance, and troubleshooting of the OmniSport® 2000 series timing syst

If the Game Log is turned on, each time a clock is started, stopped, score +1, score -1, player penalties, etc., the printout shows the time-of-day th

Driver Address This menu shows which drivers control the digits. Press [2] to display the driver addresses. This will remain on the display unti

Section 12: OmniSport 2000 for Pace Clock Reference Drawings: Insert, Omni 2000, Pace Clock ...

LCD Screens The pace clock can manage up to ten different simultaneous workouts. Each workout will display consecutively on the scoreboard‘s lane 1-10

Selecting the Scoreboard Menu is where the operator can turn the scoreboard output ON or OFF, set the dimming level for Multi-drop displays and disp

The running time must be reset before the console will display Time-of-Day on the scoreboard. Press the Arrow keys to toggle between 12 and 24 ho

Within the selected step choose from the following six modes:  1=STOP  2=BEG CIRCUIT (has a repeat count)  3=END CIRCUIT  4= SWIM (has a repe

Clear Workout To clear the entire workout that has been set up for a specific lane press [Enter]. Press [Yes] to clear the entire workout or pres

Numeric Scoreboard Menu This menu configures the numeric scoreboard. Press [Enter] to select the number of lines on the display. Use [0]-[9] to

The following terms are used to describe various mouse actions that can be used with the OmniSport 2000 Pro software. These instructions are based on

RTD Port This menu configures which protocol (RTD or CTS) will be transmitted out of the RTD port (J5) connector on the OmniSport 2000 timer. Sele

The OmniSport 2000 timer is equipped with features that test battery level and the numeric scoreboard. Battery The battery level will show as CHA

Section 13: Relay Take-Off Platform The Relay Take-Off Platform (RTOP) triggers the OmniSport 2000 console when a swimmer leaves the start block. The

d. The RTOP uses two AA batteries inside the electronics box. These batteries should be replaced before the meet, whenever the LED indicator shows

 The dual banana cord attached to the gray electronics box will be plugged into either the lane module for an on-deck system or a deck plate for an

Operating with OmniSport 2000 Console Only When operating the OmniSport 2000 timing console with the RTOPs, users need to configure the timer correctl

When storing the platform:  Store in a dry location.  Daktronics cart is the preferred method (Figure 186).  Make sure cord is not pinche

Section 14: Operating the Console in Track Mode Sport Insert LL-2573 Reference Drawing: Insert, LL-2573; OmniSport 2000 Console Track Timing ...

Section 2: Timing System Setup Daktronics aquatics timing system setup will be unique to each pool. This manual describes a typical pool setting. Gen

Lane Status The two left LCD screens show lane status symbols that may appear on the left screens during a race. The following symbols are used to sho

Start The operator has the option to start the timer counting by pressing [Start]. The printer will label the results with the source of the start. If

Place/Lane/Non-Lane Timing  Lane Timing: Pressing [Lane Timing] enables all lanes and buttons configured in the system. When this is enabled, each

The Event/Heat Number and Home/Guest Scores can be displayed on the appropriate scoreboard module if it is included in the system. When the Event/He

Always Ready Start The Always Ready Start feature is based on the fact that the OmniSport 2000 timer has an internal time-of-day clock that continuall

This section illustrates typical printouts from the OmniSport 2000 console. To create a printout from the console‘s built-in printer, refer to Sectio

Section 15: The Console’s Track Menus and Settings System Riser; FB/Track SCBD w/ Omni 2000, in Field ... Drawing A-186535 Sy

The Scoreboard Menu is where the operator can turn the scoreboard output ON or OFF, set the dimming level for Multi-drop displays and display Time-

The running time must be reset before the console will display Time-of-Day on the scoreboard. Press Arrow keys to toggle between 12 and 24 hour s

ED-13312 Product 1240 Rev 11 – 25 June 2010 DAKTRONICS INC. All rights reserved. While every precaution has be

Timing System Setup3. Bolts on newer touchpads require only one 7/16wrench (Figure 4). Use two 7/16 wrenches to tighten bolts on older touchpads (Fig

Record Time This menu is used to set an event‘s record time to be displayed. Enter a record time with the keypad and press [Enter]. Press [Clear]

Press [YES] to print the settings. Press [NO] to exit the menu without printing. When to use this:  Print the settings after the console has b

Primary Time: This menu will configure the console for which timing input(s) to use as the primary time. Primary Time is used to tell the timer

Finish Page Time This menu configures how long each page of the Finish Times will hold on the scoreboard. The typical time is set at 5 seconds.

Running Time This menu sets what data is displayed on a single line numeric scoreboard. Press [←] or [→] to display either Continuous running d

lines that the scoreboard will display, the timer will display the information in place order regardless of this setting. The default is Lane Order.

 An OmniSport 2000 cannot run a Daktronics glow cube display directly. A glow cube display will require an interface in order to be controlled by an

Race Log The Race Log allows the logging to be turned ON/OFF. Typically the Race Log is set ON. Press [←] or [→] to toggle between ON/OFF, and th

This menu is used to set the console‘s date and time. Press [0-9] to enter the correct date and time. Press [Enter] to accept the setting. Press

Driver Address This menu shows which addresses each of the drivers on the scoreboard are set to. The address plugs were inserted when the display was

Figure 9 illustrates a typical on-deck swimming installation. The on-deck system uses lane modules to interconnect the touchpads and backup buttons

Section 16: Daktronics Exchange and Repair & Return Programs To serve customers’ repair and maintenance needs, Daktronics offers both an exchange

For items not subject to exchange, Daktronics offers a Repair & Return Program. To send a part for repair, follow these steps:  Call or fax D

Index A Always Ready Start Pro swim software ... 76 Swim ...

Exchange Program ... 195 F Finish Page Time Matrix swim... 55 M

Dive ... 92 Print settings Dive ...

Pro synchro swim ... 129 Software printouts Dive ... 110, 120

Appendix A: Drawings The Daktronics drawing number is located in the bottom right corner of the drawing. Refer to Section 1.1 for information regardin

Timing System SetupEasy servicing is an additional benefit of on-deck cabling. If one lane goes bad, the whole harness does not have to be replaced; o

LL-2549 R02SWIMMING

The push button connection jacks (marked Button 1, Button 2 and Button 3) accept input from backup buttons held by up to three timing judges per lane

LL-2566, REV 02DIVING

LL-2569, REV 02WATER POLOHOMESHOT TIMEGUESTGAME TIME

TRACKLL-2573, REV 03

LL-2581, REV 01PACE CLOCK

Appendix B: Quick Reference This section includes: OmniSport 2000 Swimming Quick Reference ... ED1

ED13584 PO Box 5128 201 Daktronics Dr. Brookings, SD 57006 Rev 6 22 January 2009 Tel 605-697-430

ED13584 PO Box 5128 201 Daktronics Dr. Brookings, SD 57006 Rev 6 22 January 2009 Tel 605-697-430

ED13584 PO Box 5128 201 Daktronics Dr. Brookings, SD 57006 Rev 6 22 January 2009 Tel 605-697-430

Timing System Setup The in-deck cabling system is designed to eliminate most cables from the pool deck. Conduits, J-boxes and wall boxes embedded into

ED13584 PO Box 5128 201 Daktronics Dr. Brookings, SD 57006 Rev 6 22 January 2009 Tel 605-697-430

ED13584 PO Box 5128 201 Daktronics Dr. Brookings, SD 57006 Rev 6 22 January 2009 Tel 605-697-430

ED13584 PO Box 5128 201 Daktronics Dr. Brookings, SD 57006 Rev 6 22 January 2009 Tel 605-697-430

ED13584 PO Box 5128 201 Daktronics Dr. Brookings, SD 57006 Rev 6 22 January 2009 Tel 605-697-430

ED13584 PO Box 5128 201 Daktronics Dr. Brookings, SD 57006 Rev 6 22 January 2009 Tel 605-697-430

OmniSport® 2000 and Hy-TekLTD Software Quick Start Guide 1 of 4 201 Daktronics Drive PO Box 5128, Brookings, SD 57006 Tel: 605-697-4036 or 888-325-7

OmniSport® 2000 and Hy-TekLTD Software Quick Start Guide 2 of 4 201 Daktronics Drive PO Box 5128, Brookings, SD 57006 Tel: 605-697-4036 or 888-325-7

OmniSport® 2000 and Hy-TekLTD Software Quick Start Guide 3 of 4 201 Daktronics Drive PO Box 5128, Brookings, SD 57006 Tel: 605-697-4036 or 888-325-7

OmniSport® 2000 and Hy-TekLTD Software Quick Start Guide 4 of 4 201 Daktronics Drive PO Box 5128, Brookings, SD 57006 Tel: 605-697-4036 or 888-325-7

OmniSport Pro Diving Quick Start Guide 1 of 4 ED-16444 Rev 3 25 June 2010 201 Daktronics Drive PO Box 5128, Brookings, SD 57006 Tel: 605-697-4

Individual Lane Deck Plate The individual lane deck plate (Figure 19) has six sets of connection jacks: one touchpad, three backup push button, lane s

OmniSport Pro Diving Quick Start Guide 2 of 4 ED-16444 Rev 3 25 June 2010 201 Daktronics Drive PO Box 5128, Brookings, SD 57006 Tel: 605-697-4

OmniSport Pro Diving Quick Start Guide 3 of 4 ED-16444 Rev 3 25 June 2010 201 Daktronics Drive PO Box 5128, Brookings, SD 57006 Tel: 605-697-4

OmniSport Pro Diving Quick Start Guide 4 of 4 ED-16444 Rev 3 25 June 2010 201 Daktronics Drive PO Box 5128, Brookings, SD 57006 Tel: 605-697-4

Appendix C: Menu Navigation Shortcuts Swimming Menu Navigation 1) SCOREBOARD MENU 1-1) SCBD ON/OFF clears the display; yes or no 1-2) DIMMING sets th

5) TESTING MENU 5-1) BATTERY checks battery status 5-2) LANE MODULES allows the testing of lane modules 5-3) SCOREBOARD allows testing of the scorebo

Water Polo Menu Navigation 1) SCOREBOARD MENU 1-1) SCBD ON/OFF clears the display; yes or no 1-2) DIMMING sets the brightness level of the display 1

Pace Clock Menu Navigation 1) SCOREBOARD MENU 1-1) SCBD ON/OFF clears the display; yes or no 1-2) DIMMING sets the brightness level of the display 1

Track Menu Navigation 1) SCOREBOARD MENU 1-1) SCBD ON/OFF clears the display; yes or no 1-2) DIMMING sets the brightness level of the display 1-3) TI

Appendix D: RTD Output Specifications This appendix contains Real-Time Data (RTD) output specifications for the OmniSport 2000/6000. Serial Port (C

Timing System Setup Horn Start On-Deck Configuration ... Drawing A-185695 For typical placement

Field # Function Length Justification Item Number 30 Line 2 swimmer name 15 L 259 31 Line 2 team name 5 L 274 32 Line 2 lane number 2 R 279 33 Line 2

Field # Function Length Justification Item Number 71 Line 8 lengths completed 2 R 509 72 Line 9 swimmer name 15 L 511 73 Line 9 team name 5 L 526 74 L

Field # Function Length Justification Item Number 112 Women's team 2 abbreviation 5 L 1593 113 Women's team 2 score 6 R 1598 114 Women'

Field # Function Length Justification Item Number 153 Men's team 2 place 3 R 2070 154 Men's team 2 name 20 L 2073 155 Men's team 2 abbr

Field # Function Length Justification Item Number 194 Combined team 1 abbreviation 5 L 2559 195 Combined team 1 score 6 R 2564 196 Combined team 2 pla

OmniSport 6000 Swim RTD Item Numbers (os6000 swim.itf) Field # Function Length Justification Item Number 1 Running time 9 R 1 2 Event title line 1 30

Field # Function Length Justification Item Number 41 Line 4 lane number 2 R 329 42 Line 4 place number 3 R 331 43 Line 4 split/finish time 9 R 334 44

Field # Function Length Justification Item Number 82 Single line team name 5 L 576 83 Single line lane number 2 R 581 84 Single line place number 3 R

Field # Function Length Justification Item Number 123 Women's team 9 name 20 L 953 124 Women's team 9 abbreviation 5 L 973 125 Women's

Field # Function Length Justification Item Number 164 Men's team 9 place 3 R 1345 165 Men's team 9 name 20 L 1348 166 Men's team 9 abbr

If using the HS-200 with an Omega® timing console, connect the start cable from the console to the N/C other connectors on the HS-200. If using the H

Field # Function Length Justification Item Number 205 Mixed team 8 score 8 R 1732 206 Mixed team 9 place 3 R 1740 207 Mixed team 9 name 20 L 1743 208

Field # Function Length Justification Item # 29 3rd place diver's team 15 L 232 30 3rd place diver's total score 6 R 247 31 4th place diver&

OmniSport 2000/6000 Pace Clock RTD Item Numbers (os6000 pace clock.itf) Field # Function Length Justification Item Number 1 Line 1 Lane Number 2 R 1

Field # Function Length Justification Item Number 46 Line 10 Lane Number 2 R 145 47 Line 10 Current Step Number 2 R 147 48 Line 10 Current Step Nam

Field # Function Length Justification Item Number 37 Guest Player 4 Penalties 1 R 81 38 Guest Player 5 Penalties 1 R 82 39 Guest Player 6 Penalties 1

Field # Function Length Justification Item Number 33 Line 2 Team Name 5 L 292 34 Line 2 Lane Number 2 R 297 35 Line 2 Place Number 3 R 299 36 Line 2 S

Field # Function Length Justification Item Number 80 Line 10 Runner Name 15 L 565 81 Line 10 Team Name 5 L 580 82 Line 10 Lane Number 2 R 585 83 Line

Field # Function Length Justification Item Number 28 Judge 6 Overall/Artistic Impression 4 R 223 29 Judge 7 Overall/Artistic Impression 4 R 227 30 Jud

Field # Function Length Justification Item Number 75 7th Place Swimmer-Draw Order 4 R 699 76 7th Place Swimmer-Name 20 L 703 77 7th Place Swimmer-Affi

Field # Function Length Justification Item Number 22 Judge 2 Artistic 7 R 161 23 Judge 3 Artistic 4 R 165 24 Judge 4 Artistic 4 R 169 25 Judge 5 Artis

Timing System Setup1. Connecting deck harness and the horn start: Figure 29 shows a Near End deck harness connected to J10 and the cable from the hor

Field # Function Length Justification Item Number Total Score 56 6th Place Swimmer/Routine Members ID Number 3 R 409 57 6th Place Swimmer Name 20 L 41

Appendix E: Console and Software Revision History Timing Console Revision History Version 2.8.16 -Release date: 16 August 2002 Swimming  Initial so

 Added ability to print the current running time for the +Touch operation when a lane is armed for finish.  Corrected miscellaneous small problems

Water Polo  Added control of the horn on the multisport module for the multidrop scoreboard protocol. Version 3.4.18 -Release date: 18 April 2003

 Modified the production test so that the default configurations will be set when the console is first run after this. Swimming  Corrected proble

 Corrected periodic lockup problem with judge consoles. Pace Clock  Corrected problem of another edit key being pressed while editing step type

Swimming  Limited relay exchanges to Near end only. Version 5.2.23 -Release date: 23 February 2005 Swimming  Added configuration for showing st

Water Polo  Added a setting to control if the main clock stops when shot clock reaches zero.  Added a setting to select if the shot clock will res

 Added indication in lane status for battery low signal from relay takeoff platform. Version 7.2.8 -Release date: 3 May 2007 Swimming  Corrected

Version 9.4.6 -Release date: 6 April 2009 General  During the power up sequence of the timer, the proper format to enter the data is shown for the

The OmniSport 2000 console will time swimming and diving meets without the Pro software. The OmniSport 2000 Pro software allows officials to run even

 Added the ability to show '0.00' for the running time on single line scoreboards upon reset of the timer when the Finish Page Time is set

Version 1.10 (Beta) -Release Date: 1 November 2002  Added functionality for Event Order printouts.  Added code to stop console from sending a ra

Version 1.16 -Release Date: 23 September 2003  Fixed the swimmer's name and affiliation that would get removed from the current race results i

 Added support for Chinese (Traditional)  Added Exchange printout.  Fixed bug with the ―Use Missed Start At:‖ dialog, which was introduced in ve

 Fixed a bug that didn‘t allow changing the score calculation in the event setup.  Added ability to auto-update database if new versions use datab

 Updated copyright protection services to work under newer operating systems.  New installation icon and shortcuts.  Fixed bug with coloring sch

Appendix F: Daktronics Warranty and Limitation of Liability

Copyright © Daktronics, Inc. SL-02374 Rev 10 02-Mar-2009 Page 1 of 2 DAKTRONICSWARRANTY AND LIMITATION OF LIABILITY This Warranty and Limi

i 1.1 Manual Contents for Version 8.3.27 and Beyond ... 1 1.2 Timer Overview ...

Timing System Setup After each meet, it is crucial to follow these basic maintenance procedures to ensure the longevity of the timing equipment. 

Copyright © Daktronics, Inc. SL-02374 Rev 10 02-Mar-2009 Page 2 of 2 D. Damage caused by fire, flood, earthquake, water, wind, lightning or

Section 3: General Console Features and Operations (non-sport specific) This section introduces the user to the OmniSport® 2000 timing console. The

General Console Features and OperationsSport Insert Number Swimming LL-2549 Diving LL-2566 Water Polo LL-2569 Track LL-2573 Pace Clock LL-2581 Note:

5. Place the newly cut squared edge of the paper into the back side of the black rubber roller on the printer. The printer should automatically advan

General Console Features and Operations Channel Selection: Single Control Console, Gen IV ... Drawing A-180566 Channel Selec

3. Multiple Controller with Multiple Broadcast Groups: In a multiple controller with multiple broadcast (split pool operation) system, there are add

General Console Features and OperationsBroadcast Group Setting 1 The asterisk will move to the channel setting. Use the number keys to edit this value

A prompt will appear on the desktop to Run or Save the program. Select Run. The DakLoader2 program should open as shown in Figure 44. 3. Open the Fi

Section 4: Operating the Console in Swimming Mode Sport Insert LL-2549 Insert: LL-2549 Swimming OmniSport 2000 console ...

ii 3.7 Updating Software in the Console ... 20 4.1 General Fea

Operating the Console in Swimming ModeThe (R) disappears if an event is selected that is not programmed. To set the Event Order, refer to Section 4.3.

Lane ON/OFF for Each Individual Lane At the start of a race, the time automatically turns every lane on. It is up to the operator to turn them off if

Operating the Console in Swimming ModeExamples when to use Split Arm:  During a relay, the arming delay for the touchpad was too short because a s

Examples when to use Store Print:  To verify the results before the console is reset. This might be to look at the tolerances between the touchpad

Operating the Console in Swimming Mode The Round can be left Blank, set to Preliminary, Semi-Final or Final. The Round allows the results program to d

Menu Press [Menu] to access additional functions and settings in the console (Figure 49). Section 5: describes the menus in swimming and how to naviga

Operating the Console in Swimming Mode1 2 3 4 5 6 7 8 9 10 The top line of the two le

The normal single-line display of timing information is completely automatic and does not require any operator input. The following information is fo

Operating the Console in Swimming Mode Multiple-line scoreboards are any LANE, PLACE and TIME digit board that will display two or more lanes of resul

Before the race begins the operator must set and confirm that the OmniSport 2000 console is ready to record the correct event. Verify the Console is

iii Swimming Printouts... 37 In Lane and In Place O

Operating the Console in Swimming Mode Near End and Far End Touchpad Status Near End Touchpad Status and Lengths Completed Lengths Compl

start signal, the timer will automatically start timing the event by calculating the correct running time. If the timer has already been reset, press

Operating the Console in Swimming ModeArming Delay The Arming Delay is the time after a start or split that the timer ignores the touchpad. It is prim

Swimming Printouts Figure 55 illustrates a typical printout for a 10-lane race log. The right printout shows the heat results with backups (the times

Operating the Console in Swimming ModeRelay Exchange Printout An abbreviated Relay Exchange printout is illustrated in Figure 57. The OmniSport 2000 c

Following is a list of typical expectations of the aquatics operator before and during a meet:  Get the schedule of events and times and arrive a

Section 5: The Console’s Swimming Menus and Settings The console saves the settings and does not need to be re-configured once it is set. The quickes

The Console’s Swimming Menus and SettingsArming Delay. Daktronics provides a laminated copy of the OmniSport 2000 Swimming Quick Reference (ED13584).

When to use this:  In low light conditions the scoreboard may be too bright.  In direct sunlight the scoreboard may need to be turned to full br

iv Results Order ... 55 Subtractive Spl

The Console’s Swimming Menus and SettingsSome operators will use the four scores (H, G1, G2 & G3) as HOME and GUEST for men and women or HOME and

When to use this:  If the console is not connected to a results program that downloads the event order.  If the console is not connected to a co

The Console’s Swimming Menus and SettingsUse [↓] [↑] to select the event location number to be deleted. Press [Enter] to delete the location number sh

To print a stored race, press [0]-[9] to enter the desired race number and press [Enter]. The LCD screen will then prompt the operator to verify t

The Console’s Swimming Menus and SettingsWhen to use this:  Print the settings after the console has been set up and verified that all is functioni

by the length of the pool to calculate the number of lengths for each event. Knowing the number of lengths in an event is important so that the consol

The Console’s Swimming Menus and SettingsManufacturers of Horn Starts Type of Output(s) Daktronics HS-200 N.O. and N.C. Colorado Timing Systems N.O. O

Flag Time This menu determines the time (Flag Time) used when the touchpad is compared to the back-up time. If the discrepancy exceeds the flag

The Console’s Swimming Menus and SettingsThe console can be set to NONE, BTN/DAKTRONICS or OMEGA PLATFORM. NONE tells the timer that there are no pl

Split Hold Time Select Split Hold Time to configure how long the split times remain on the scoreboard. The Split Hold Time can be set from 1-99 sec

v Comm Ports ... 74 6.7 Typical Oper

The Console’s Swimming Menus and SettingsSubtractive Splits This setting configures the console to display only the cumulative split or the first su

be set from 1-99 seconds. The default time is 15 seconds. Press [0]-[9] to enter the number of seconds and then press [Enter] to save. Note: Fo

The Console’s Swimming Menus and SettingsShow DQ This menu selects the DQ information to display. Press [←] or [→] to select only to display the DQ

Scoreboard Outputs Select Scoreboard Outputs to assign a protocol used to transmit data in outputs (J2 and J3). Press [←] or [→] to select Multi

The Console’s Swimming Menus and SettingsThe OmniSport 2000 (default) and the OmniSport 6000 are bi-directional protocols. The CTS console is unidirec

Splits This menu configures if split times will be printed with the race results. Press [←] or [→] to select NONE, SUBTRACTIVE, or CUMULATIVE.

The Console’s Swimming Menus and Settings The two left LCD screens will show the lane module input status by lane. Figures 63-64 show feedback for th

Section 6: OmniSport 2000 Pro Swimming Software The OmniSport 2000 Pro Swimming software interfaces with the OmniSport 2000 timer and allows timing o

62 OmniSport 2000 Pro Swimming SoftwareTo install the Pro Swimming software from a CD: 1. Insert the software CD into the computer‘s CD-Rom drive

The Standard Console Control level of registration allows the complete use of the software except the use of the race log files and the results printo

vi Delete Event ... 90 Clear Order ...

64 OmniSport 2000 Pro Swimming SoftwareNew Event Order When the Pro software is started, the OmniSport 2000 timer sends the event order data. If a

Lane Indicators, Buttons and Icons The lane indicators, buttons, and icons relay event information to the user. This information should be used to det

66 OmniSport 2000 Pro Swimming SoftwareEvent Data The top area of the main application screen displays current event details and options as shown i

Main Application Screen Tabs The main application screen contains four tabs (Figure 76). Click on the tab to switch between the different functions. T

68 OmniSport 2000 Pro Swimming Software Another editing option for the user is to right-click on a field (Figure 78) and select an option from the

If there is only one person available, click Lane Module Test Mode, then turn the computer monitor so it can be seen from the touchpads and lane modul

70 OmniSport 2000 Pro Swimming SoftwareTimer The Timer tab (Figure 82) configures the inputs and precision of the timer.  The Arming Delay is th

Console Printer The Console Printer tab Figure 83 configures the printer settings for the printer built into the timing console. Each setting‘s opti

72 OmniSport 2000 Pro Swimming Software Finish by Lane prints the results of the event by lane.  Finish by Place prints the results of the eve

SCBD The SCBD tab (Figure 85) configures the output for both a numeric scoreboard and a matrix display. The drop down list boxes set the appropriate

vii 9.1 Computer Requirements ... 105 9.2 Connec

74 OmniSport 2000 Pro Swimming SoftwareResults The Results tab (Figure 86) is disabled. Currently, only a serial connection is available until futu

The Interface Comm Port area configures which port is used to interface the OmniSport 2000 timing console to the OmniSport 2000 Pro computer.  Cl

76 OmniSport 2000 Pro Swimming SoftwareSet Up Event Order Open the event order file by selecting the Event Order tab on the Configure window. From

If two independent OmniSport 2000 timers are being used in parallel for an especially critical application and one timer misses a start impulse comple

78 OmniSport 2000 Pro Swimming Software Arming Buttons are used to change the lane arming status during an event. There may be a time when a swi

79Section 7: OmniSport 2000 Console for Diving Sport Insert LL-2566 Reference Drawings: Insert; Diving; Omni 2000 ...

Three things to remember about the OmniSport 2000 diving program:  Divers‘ names or affiliation are not entered into the console and do not appear

81information such as menu selections, round and diver edits. The scoring keys are only used to enter scores. Round Key The diving program in the co

The second function is to select the Dive Position when entering each dive. The table below outlines those positions. Dive Position OmniSport 2000 Le

83Fail and Balk Fail and Balk keys are only used when the score operation is active. If an official determines that a diver balked on the dive or fail